J-Tech Digital HDMI Extender By Single Cat 5E/6 Full Hd 1080P With Deep Color, EDID Copy, Dolby Digital/DTS
Price:
(as of – Details)
Product Description
Key Features
Simple Setup
This device uses one piece of CAT5/6/7 cable to extend the HDMI signal up to 200ft at 1080p. It not only breaks the limitation of HDMI cable lengths but also has more flexibility and convenience for installation. It is equipped with HDMI connectors that will also support DVI equipment when using an HDMI to DVI converter, which will provide more flexibility when integrating with several home theater components. The extender system consists of a transmitter and a receiver unit. Connect your HDMI source such as a set-top box. DVD player or gaming console to the Transmitter with an HDMI cable.The Transmitter will connect to the Receiver through a CAT cable and finally, the display will connect to the Receiver with an HDMI cable.
How do you perform the EDID copy function?
Connect the transmitter to an available HDMI input port of your display via HDMI cable. Power on your display and set your display’s source to the corresponding HDMI input port. Power on your transmitter. Press the EDID button for 1-2 seconds. Your status lights will change from red to green, then back to red. This indicates a successful EDID copy. Disconnect the power adapter from the transmitter before re-connecting the transmitter to your source device.
Free Lifetime Support
All J-Tech Digital Products include free lifetime technical support from our Customer Support Team located in Houston,Texas – Available M-F 9AM-6PM CST – Contact information available on the J-Tech Digital Seller Page.
Max Resolution
1080p@60HZ
1080p@60HZ
4K@60HZ Chroma 4:4:4
4K@60HZ Chroma 4:2:0
1080p@60HZ
Protocol
Proprietary
HDBaseT
HDBaseT
HDBaseT
HDBitT
Transmission Range
200ft
500ft
1080p 230ft, 4K 131ft
1080p 230ft, 4K 131ft
400ft
IR Remote Control
No
Bi-Direction
Bi-Direction
Bi-Direction
Uni-Direction(Display to Source)
HDMI Version
No
1.4
2.0
2.0
1.4
HDCP Version
1.4
1.4
2.2
2.2
1.4
HDR
No
No
Yes
No
No
EDID
Copy
Pass-through
Pass-through
Pass-through
Fixed
RS-232
No
Yes
Yes
Yes
No
Power Over Cable
No
Yes
Yes
Yes
No
HDCP 1.2/1.4; 1080P/1080i/720P/576P/576i/480P/480i; Support 3D video
Support Video Color: 36bit(CAT7); 24bit(CAT6); Supports 2-channel PCM audio only. Supports Dolby Digital / DTS pass through if copied EDID from right display devices.
Support up to 200ft between the TX and RX unit; For better picture quality and longer distance transfer, we recommend to use Cat 6 or Cat 7 cable.
For better performance, we suggest using solid COPPER ethernet cable with this product. For GUARANTEED optimal performance, use the J-Tech Digital Customized 150ft Cat6 Ethernet Cable. Please search the ASIN number “B01IPYVT3Y” on Amazon for more details.
Comments
Post a Comment